Vibration Testing Services

May 29, 2016
Home » Testing & Validation Services » Dynamic Testing » Vibration Testing Services

vibration testing services

Vibration Testing Services

Vibration testing simulates the vibration conditions that a product might experience during its lifetime but under a controlled and repeatable test environment. Vibration tests are conducted to ensure that finished products can perform safely during operation or transit and to avoid unexpected performance issues or early failure during use.

Because products spend their lifetime in different environments and these environments exhibit unique vibration profiles, our vibration testing services are tailored to fit each unique environment with specific vibration control profiles.

We have over 20 years of extensive experience in vibration testing services and our vibration testing lab features electro-dynamic systems with multiple shakers that can replicate low and high-frequency conditions. Your vibration testing can be completed while the product is in operation, including electrically and hydraulically and this can be performed in combination with temperature extremes.

From the smallest mechanical shock and vibration testing project to the largest and most challenging mil standard vibration testing, our highly experienced experts will ensure that your product is tested and qualified to the highest standards required of your industry.
vibration testing services

At Paragon Systems, our vibration testing services capabilities are structured to give you confidence that your test program will be successfully completed on-time and on budget. Our vibration test laboratory features multiple high force electrodynamic vibration tables which can test to a wide range of frequencies, amplitudes and control spectrums such as sine, random, sine-on-random or narrow band random-on random with multiple channels for monitoring accelerometers.

If you have a HALT reliability testing requirements, our vibration testing lab has the capability to combine a rapid temperature ramping environment along with vibration testing with our AGREE chamber which can achieve temperature transition rates as high as 20°C per minute.

What makes our services unique is our capability to provide one-stop shop vibration testing service with in-house design, fabrication, and qualification of vibration fixtures which will save you time and cost.

vibration testing services

The requirements which describe your vibration testing project are usually found within standard test methods. These methods are tailored to meet the requirements of different industries. Paragon Systems technical staff are experienced with automotive, rail transport, electronics, defense and shipping test methods.

Our vibration testing services can perform the following standards

American Railway Engineering and Maintenance-of-Way Association (AREMA)

AREMA Part 11.5.1

ASTM International

ASTM C192 / C192M, ASTM D395, ASTM D4169, ASTM E587, ASTM D999, ASTM D4728, ASTM D4169

BellCore Telcordia

BellCore GR-63-CORE 5.4.2, 5.4.3

British Standards Institute

BS EN 60068-2 Series (-6, 50, 51, 53, 64), BS EN61373, BS EN 50155

California OSHPD Code Application Notice (US)

CAN 2-1708A.5

Defence Standard (UK)

DEF STAN 00-35, DEF STAN 08-123

Institute of Electrical and Electronics Engineers

IEEE 344, IEEE 693, ASCE 7-10, AC 156, GR-63-CORE

International Code Council

ICC AC-156

International Electromechanical Commission

IEC 68-2-59, Test Fe, IEC 68-2-26, IEC 68-2-34, Test Fd,  IEC 68-2-35, Test Fda, IEC 68-2-6, IEC 60068-2-64, Test Fc, IEC 61373, IEC 60945, Section 8.7, IEC 60079-29 (-1, 4)

International Organization for Standardization

ISO 1940-1, ISO 10816-1/6, ISO 16750-3

International Safe Transit Association

ISTA 1B, ISTA 1C, ISTA 1E, ISTA 2A, ISTA 2B, ISTA 2D, ISTA 3A (3C,3D), ISTA 3F, ISTA 3G, ISTA 7B, ISTA 7D

Japanese Industrial Standards

JIS D 1601, JIS E 3014

JEDEC Solid State Technology Association

JESD22 B103B

General Motors Worldwide

GMW 3172

Military Standard (US)

MIL-STD- 167, MIL-STD-202 E/F/G (Method 201), MIL-STD-202 E/F/G (Method 204), MIL-STD-202 E/F/G (Method 214), MIL-E 5272, MIL-STD-810 E/F/G (Methods 514, 519), MIL-STD 883 G/H (Method 2005), MIL-STD 883 G/H (Method 2007), MIL-STD 1344 A Method 2005)

Netherlands Standardization Institute

NEN-ISO 10326

Radio Technical Commission for Aeronautics

RTCA DO-160 E/F/G, RTCA DO-227 6/23/1995 Sec. 2.3.1

SAE International

SAE J575, SAE J1211, SAE J1455, SAE J1810

United Nations Recommendations on the Transport of Dangerous Goods

UN ST/SG/AC.10/11/Rev.5 Para. 38.3.4.3

Verein Deutscher Ingenieure

VDI 2057-1,2, VDI 2059-1,3,4,5

 

vibration testing services

With our range of electro-dynamic systems, Paragon Systems provides one-stop vibration testing services solution to your vibration test requirements.

At Paragon Systems, we make it easy for you to complete your vibration testing project with an assortment of vibration testing equipment which means we can usually schedule your vibration test within a short period of time of you contacting us.

ShakersVibration Testing Services

  • Frequency Range: From DC up to 3,000 Hz
  • Displacement: 50 mm maximum
  • Product Weight: 455 kg with supplementary support
  • Acceleration: 100 g maximum

Controller

  • Input Channels: 16 accelerometers maximum

Data Acquisition

  • Channels: 10 accelerometers maximum

AGREE Chamber

  • Temperature Range: -70°C to +120°C and up to 95% RH
  • Ramp Rate: 20°C per minute max.
  • Largest Inside Dimensions: 1.37 m L x 1.37 m W x 1.00 m H
  • Door Opening: 1.37 m W x 1.00 m H

vibration testing services

More From Paragon Systems

Vibration Testing Services

Vibration Testing

That device on which you need to perform vibration testing will spend its lifetime in different environments.

Pneumatic Assisted Mechanical Shock

Mechanical Shock Testing

The electrodynamic vibration test machines are also used to generate highly repeata- …

Quiet shaker performing buzz, squeak and rattle testing of pedal assembly

Buzz, Squeak & Rattle Testing

Annoying vehicle noises in vehicle interiors occur when incompatible contacting  …

vibration testing fixture

Vibration Testing Fixtures

Almost anything that requires vibration testing also requires vibration testing fixtures …

Engage with an expert, Request a quote today!

We provide one-stop-solutions for test automation, prototyping, and validation. Delivering accurate and reliable service you can absolutely rely on when making decisions about your materials and compliance.  vibration testing services