What is Thermal Shock Testing or Temperature Cycle Testing?
By Paragon Systems
/
January 15, 2020
Both thermal shock testing and temperature cycle testing exposes a device under test (DUT) to alternating high and low air temperatures to accelerate failures caused due to repeated temperature variations during normal use conditions.
Read More
What is Highly Accelerated Life Testing (HALT)?
By Paragon Systems
/
November 29, 2019
HALT (Highly Accelerated Life Testing) is a proven rigorous reliability test method designed by ESPEC to identify weaknesses and design defects in electronics and electromechanical devices.
Read More
Cured-in-Place Pipe (CIPP) rehabilitation is a realistic and cost-efficient alternative to extend the life of existing sewer lines. This procedure offers rehabilitation for pipes without the need to dig into the existing pipeline.
Read More
This is a simulation of the natural conditions using extreme weathering condition to speed up the weathering process and evaluate the impacts on the materials. This testing technique is applied to measure future degradation or corrosion of materials.
Read More
As a design engineer, below are few points to put into consideration when evaluating or comparing potential mechanical shock and vibration testing laboratories.
Read More
How To Choose The Right Vibration Test Lab
By Paragon Systems
/
September 24, 2019
The decision to finding the right vibration test lab to perform your vibration tests shouldn't be rushed.
It requires conducting thoroughly research and asking questions regarding any vibration test lab you are considering.
After all, you don’t want to have to repeat the tests or have your product development behind schedule.
Read More
Understanding Random Vibration Testing and Sine Testing
By Paragon Systems
/
September 9, 2019
Random vibration testing is an invaluable general-purpose tool for environmental vibration simulation & most common types of vibration testing services performed by vibration test labs
Read More
The Difference between Solar Climatic Test and Xenon Weathering Test
By ParagonAdmin
/
June 28, 2019
What is solar climatic testing? Solar climatic testing is the process of simulating realistic out-door environmental conditions in a natural...
Read More
Vibration Testing Profiles – Which Should You Perform?
By ParagonAdmin
/
May 10, 2019
There are four types vibration testing profiles; each designed to simulate the vibration energy observed on each unique system.
The decision to select the ideal profile to perform a vibration test should be depending on the environment and the goal of the test program.
Read More
Plastics don’t respond in the same manner with metals. Even when stressed below their yield stress, plastic materials will creep and given sufficient time under load plastics can fail. It’s critical to understand this creep characteristic when designing a CIPP liner installation.
Read More
The Differences in North American and International CIPP Flexural Test Methods
By ParagonAdmin
/
February 25, 2019
Since the CIPP industry is now effectively a global supply chain, it’s useful to examine the differences between ASTM F1218 and ISO 11296 to determine how CIPP flexural properties measured by the North American testing method compares with flexural results determined by the international method.
Read More
Ensuring That You Get Valid Data from Your Vibration Test
By ParagonAdmin
/
February 14, 2019
Understanding what the vibration testing lab will be doing for you is critical to ensuring that the test data which you will receive is valid and not affected your lack of experience in the test method.
Read More
How do I conduct a BSR test? A BSR (buzz, squeak and rattle) test is deceptively simple to perform. All...
Read More
Getting CIPP Installation Paperwork Done Faster with Chain of Custody Forms
By ParagonAdmin
/
January 9, 2019
The Job Is Not Finished Until The Paperwork Is Done. So, your crew has just completed your latest CIPP installation....
Read More
The quality and durability of automotive exterior finishes has improved dramatically in the last 20 to 30 years. The dismal...
Read More
Product Testing: Automobile Manufacturing Industry To manufacture vehicles which customers want to buy them is quite a demanding and highly...
Read More
Accelerated Weathering with Temperature & Humidity Cycling
By ParagonAdmin
/
September 28, 2018
Accelerated Weathering with Temperature & Humidity Cycling In the past, there used to be adequate time for developing and testing...
Read More
Vibration Testing – Where Should You Mount The Control Accelerometer?
By ParagonAdmin
/
September 21, 2018
Vibration Testing – Where Should You Mount The Control Accelerometer? When you contract a vibration testing services laboratory what you’re...
Read More
Trends in Vehicle NVH Testing Before the era of air conditioning, everyone drove around in their cars with their windows...
Read More
Accelerometer Selection for Vibration Testing
By ParagonAdmin
/
September 14, 2018
Accelerometer Selection for Vibration Testing When you boil it down to its essentials, vibration testing is about introducing a specified...
Read More
What is Thermal Shock Testing or Temperature Cycle Testing?
By Paragon Systems
/
January 15, 2020
Both thermal shock testing and temperature cycle testing exposes a device under test (DUT) to alternating high and low air temperatures to accelerate failures caused due to repeated temperature variations during normal use conditions.
Read More
What is Highly Accelerated Life Testing (HALT)?
By Paragon Systems
/
November 29, 2019
HALT (Highly Accelerated Life Testing) is a proven rigorous reliability test method designed by ESPEC to identify weaknesses and design defects in electronics and electromechanical devices.
Read More
What is Cured-in-Place Pipe (CIPP)?
By Paragon Systems
/
November 29, 2019
Cured-in-Place Pipe (CIPP) rehabilitation is a realistic and cost-efficient alternative to extend the life of existing sewer lines. This procedure offers rehabilitation for pipes without the need to dig into the existing pipeline.
Read More
What is Accelerated Weathering Test?
By Paragon Systems
/
October 24, 2019
This is a simulation of the natural conditions using extreme weathering condition to speed up the weathering process and evaluate the impacts on the materials. This testing technique is applied to measure future degradation or corrosion of materials.
Read More
How To Prepare For Mechanical Shock Testing
By Paragon Systems
/
October 24, 2019
As a design engineer, below are few points to put into consideration when evaluating or comparing potential mechanical shock and vibration testing laboratories.
Read More
How To Choose The Right Vibration Test Lab
By Paragon Systems
/
September 24, 2019
The decision to finding the right vibration test lab to perform your vibration tests shouldn't be rushed.
It requires conducting thoroughly research and asking questions regarding any vibration test lab you are considering.
After all, you don’t want to have to repeat the tests or have your product development behind schedule.
Read More
Understanding Random Vibration Testing and Sine Testing
By Paragon Systems
/
September 9, 2019
Random vibration testing is an invaluable general-purpose tool for environmental vibration simulation & most common types of vibration testing services performed by vibration test labs
Read More
The Difference between Solar Climatic Test and Xenon Weathering Test
By ParagonAdmin
/
June 28, 2019
What is solar climatic testing? Solar climatic testing is the process of simulating realistic out-door environmental conditions in a natural...
Read More
Vibration Testing Profiles – Which Should You Perform?
By ParagonAdmin
/
May 10, 2019
There are four types vibration testing profiles; each designed to simulate the vibration energy observed on each unique system.
The decision to select the ideal profile to perform a vibration test should be depending on the environment and the goal of the test program.
Read More
Why do we do long-term creep testing?
By ParagonAdmin
/
March 28, 2019
Plastics don’t respond in the same manner with metals. Even when stressed below their yield stress, plastic materials will creep and given sufficient time under load plastics can fail. It’s critical to understand this creep characteristic when designing a CIPP liner installation.
Read More
The Differences in North American and International CIPP Flexural Test Methods
By ParagonAdmin
/
February 25, 2019
Since the CIPP industry is now effectively a global supply chain, it’s useful to examine the differences between ASTM F1218 and ISO 11296 to determine how CIPP flexural properties measured by the North American testing method compares with flexural results determined by the international method.
Read More
Ensuring That You Get Valid Data from Your Vibration Test
By ParagonAdmin
/
February 14, 2019
Understanding what the vibration testing lab will be doing for you is critical to ensuring that the test data which you will receive is valid and not affected your lack of experience in the test method.
Read More
Automotive BSR Testing
By ParagonAdmin
/
January 25, 2019
How do I conduct a BSR test? A BSR (buzz, squeak and rattle) test is deceptively simple to perform. All...
Read More
Getting CIPP Installation Paperwork Done Faster with Chain of Custody Forms
By ParagonAdmin
/
January 9, 2019
The Job Is Not Finished Until The Paperwork Is Done. So, your crew has just completed your latest CIPP installation....
Read More
Cyclic Corrosion Lab Testing
By ParagonAdmin
/
October 11, 2018
The quality and durability of automotive exterior finishes has improved dramatically in the last 20 to 30 years. The dismal...
Read More
Product Testing: Automobile Manufacturing Industry
By ParagonAdmin
/
October 4, 2018
Product Testing: Automobile Manufacturing Industry To manufacture vehicles which customers want to buy them is quite a demanding and highly...
Read More
Accelerated Weathering with Temperature & Humidity Cycling
By ParagonAdmin
/
September 28, 2018
Accelerated Weathering with Temperature & Humidity Cycling In the past, there used to be adequate time for developing and testing...
Read More
Vibration Testing – Where Should You Mount The Control Accelerometer?
By ParagonAdmin
/
September 21, 2018
Vibration Testing – Where Should You Mount The Control Accelerometer? When you contract a vibration testing services laboratory what you’re...
Read More
Trends in Vehicle NVH Testing
By ParagonAdmin
/
September 19, 2018
Trends in Vehicle NVH Testing Before the era of air conditioning, everyone drove around in their cars with their windows...
Read More
Accelerometer Selection for Vibration Testing
By ParagonAdmin
/
September 14, 2018
Accelerometer Selection for Vibration Testing When you boil it down to its essentials, vibration testing is about introducing a specified...
Read More